FID 9000 – static COV FID analyser

Exceptional dynamic scale allowing a measurement of 10 ppb to 100% Vol

The FID 9000 analyser offers unrivalled flexibility and enables you to conduct fully-automated, continuous gas analysis in a broad range of concentrations. With a wide and dynamic range of less than 10 ppb for the Standard version and up to 100% methane for the Pro version. The FID 9000 analyser has many different options for analog, digital and logic outputs.

These features make this tool a market leader in terms of performance, automation and configuration. The FID 9000 analyser is based on a flame ionisation detector (FID) with electronic flow control that injects a small portion of the gas sample into the detector. During the combustion process, the organic or hydrocarbon-based gases contained in the gas sample are ionised so they can be detected and analysed as a concentration. The FID 9000 analyser can be configured with internal components for a non-condensing or multi-point sample analysis point. Its automatic calibration improves the stability of long-term analyses.

Fast response time

An electronic back-pressure regulator with sampling bypass system ensures a rapid response.

Exceptional dynamic scale

Measurement of 10 ppb to 100% Vol.


Single point or multi-point internal modules for pre-filtered samples (<0.1 microns and condensers with or without sampling pump

FID 9000 Analyser: Technical Specifications

  • Detector: flame ionisation detector (FID).
  • Scale: 0-2000 ppm or 0-20 000 ppm or 0-100% (CH4)
  • MDQ: low scale (0.01 ppm), medium scale (0.10 ppm), high scale (10.0 ppm)
  • Repeatability: +/- 1% PE response
  • Drift: +/- 1% over 24 hours
  • Response time: <5 seconds on 90% of the final reading
  • Alarms: audible and visual alarms for multi-level concentration, and fault alarms. Alarms can also be linked up with external equipment control relays.
  • Sampling: one-point or multi-point internal modules for pre-filtered samples (<0.1 microns and non-condensants, with or without sampling pump.
  • Calibration: automatic or manual
  • Gas: Hydrogen 35cc / min, Air 175 cc / min.
  • Configuration: bench-top or rack-mounted 19 "(48.3 cm)
  • Connections: ¼ "(6.35 mm)
  • Operating temperature: 0 - 40 ° C
  • Operating humidity: 0 - 95% (non-condensing)
  • Power: 90 - 230 VAC, 50 / 60Hz, 3A
  • Display: 3.4 "x 4.5 (8.6 cm x 11.4 cm) screen
  • Outputs:
    • Logic: 5 programmable relays - 3A @ 230V AC
    • Analog: 1 programmable 0-20mA output or 4-20mA isolated
    • Digital: RS-232, Ethernet
  • Inputs: 3 contacts optionally available
    • To start the analysis
    • To start the calibration
    • To start the gas test
  • Size: 19.00 "(48.3cm) W x 14.25" (36.2cm) Dx 5.25" (13.3cm)
  • Weight: 10 kg

FID 9000 Analyser Accessories

  • CH4 / NMTHC separation Catalyst
  • Multichannel systems
  • Sparger for HCT analysis in water
  • Card relay input for remote control (eg, automated)

FID 9000 analyser Uses

The FID 9000 analyser is designed for the continuous monitoring of total hydrocarbons in non-condensed gases. Its many different applications include:

  • Efficiency Monitoring: Oxidiser & Scrubber
  • Carbon detection
  • Impurities in pure and ultra pure gases
  • Oil drilling
  • Industrial Hygiene & Safety Control
  • Perimeter monitoring around industrial sites
  • LIE monitoring


  • Automatic FID ignition, with automatic shut-off of sample, fuel and combustion air.
  • Automatic calibration